SIA Ecodesign Ready stoves are designed to reduce PM emissions by burning wood more efficiently and completely.
The stoves have been independently tested by an approved test laboratory and met the emissions and minimum efficiency criteria for Ecodesign. The test results have also been verified by HETAS and listed on the HETAS website.
Ecodesign is the European-wide programme to lower emissions. It is due to come into force for stoves in the UK in 2022. SIA Ecodesign Ready stoves will meet the Ecodesign requirements and are available now. The PM emissions limit for Ecodesign is 55% lower than for DEFRA exempt stoves.
Burning wood produces particulate matter (PM) but the amount produced depends on how the wood is burnt. Independent research conducted by Kiwa Gastec on behalf of the SIA has shown that SIA Ecodesign Ready stoves can reduce particulate emissions by 90% compared to an open fire and 80% compared to an old stove (see the test results at the bottom of the page).
Both Defra and the Mayor of London are backing the installation of SIA Ecodesign Ready stoves to reduce emissions from wood burning.
In its Clean Air Strategy Defra recognises that all wood burning is not the same and that reductions in particulate emissions, (PM), can be achieved through the installation of Ecodesign Ready stoves burning Ready to Burn logs.
The Mayor of London showed his support for Ecodesign Ready stoves by sponsoring two adverts in the Evening Standard encouraging Londoners to only burn dry wood and choose a Defra exempt stove which is also Ecodesign Ready.
The Results Speak for Themselves
Ecodesign Ready Stoves are significantly cleaner burning
Independent research conducted by Kiwa Gastec on behalf of the SIA has shown that modern clean burning stoves, designed to meet the new Ecodesign requirements will reduce significantly emissions compared to an open fire and a stove of 10 years ago.
The tests covered the emission of particles, other carbon gases (OCG) and NOx from an open fire, a stove from 10 years ago and a stove designed to meet the stringent emission levels in Ecodesign. The results are summarised in the graphs below: